 ExcelAir® 70 UltraLite 
OVERVIEW
 Axxcelera ExcelAir® UltraLite is a low cost, point-to-multipoint broadband fixed wireless access base station, offering service providers quick-to-market deployment of high-speed data and multi-media services in rural or low customer density areas. ExcelAir UltraLite is based on the same high-capacity and carrier class technologies of the ExcelAir 70, yet the start-up costs are dramatically reduced. ExcelAir UltraLite provides a fixed wireless platform for the simultaneous delivery of IP-based rich applications and circuit based voice and data connectivity services. These multi-service capabilities enable faster capital cost recovery and earlier profitability essential to achieving operators specific business case objectives.
ExcelAir UltraLite operates over licensed 3.4-3.6 GHz frequency range, and features a standards-based architecture with a low market entry cost. ExcelAir UltraLite offers optional Axxcelera EMS management, EPS provisioning, as well as installation utilities, ensuring long-term carrier-grade availability, manageability and performance. The system can provide up to 360° of coverage utilizing a single sector, and can be deployed in either single cell or multi-cell schemes. ExcelAir UltraLite supports 60 degrees, 90 degrees and omni antenna configurations. It is the perfect solution for rural markets requiring inexpensive broadband connectivity with carrier-grade reliability and performance.
Key Features
• Multiple antenna configurations
• Field-replaceable components
• Single cell or multi-cell
Deployment capabilities
• Standard-based system
- IP, Ethernet, DOCSIS
SNMP, IEEE802 & IEEE803
• Comprehensive solution
• Single, efficient multi-service
platform
• Axxcelera ExcelAir®
Management System
(Axxcelera EMS)
• Axxcelera ExcelAir®
Provisioning Services
(Axxcelera EPS)
|
|
Benefits
• Low market entry cost
• Efficient, “invest where your customers are” deployment Capabilities to target varying subscriber densities
• Faster Return on Investment (ROI)
• Seamless, industry-standard, network capability
• Protection against hardware/technology obsolescence
• Leverage proven technologies and economies of scale
• End-to-end wireless access system. Ethernet to Ethernet.
• Fully managed system
• Full services and support offering
• Compatible wireless/wireline network manageability
• Support any data/voice traffic mix
• Low latency, toll-quality voice services (requires voice gateway)
• Compatible wireless/wireline network manageability
• Improved network operational efficiencies
• Support for our QoS and SLA guarantees
• Carrier-grade availability, manageability, performance
• Graphical utilities simplify system installation and diagnosis
• Allows for rapid, wide-scale deployment of subscribers.
• Enables "differentiated" services plans.
• Scales readily with system growth.
|
|
SPECIFICATIONS
Passband (Tx, Rx)
32 MHz min.
Access Method
TDMA/FDD
Tx/Rx Separation
100 MHz typ., 50 MHz min.
Modulation supported
Downstream: 64QAM, 16QAM, or QPSK
Upstream: 16QAM or QPSK
RF Channel Sizes
Downstream: 1.75 MHz to 7 MHz
Upstream: 1.75 MHz to 3.5 MHz
Controllable Physical Layer
Symbol rate, spectrum inversion, downstream and upstream frequency, modulation, and transmit power level
Forward Error Correction
Reed Solomon
Antenna Gain
Standard Axxcelera Models:
14.5 dBi - 90 Degree
16.5 dBi - 60 Degree
Number of Antennas
1
Number of RF Sectors (Transceivers)
1
Number of CPEs (max. recommended)
500
Transmit Power (at antenna port on chasis)
+27.8 dBm (max. 64 QAM)
+29.0 dBm (max. 16 QAM)
+31.0 dBm (max. QPSK)
Transmit Spectral Mask
ETSI EN 301 021 v1.3.1
Receive Threshold Sensitivity (at antenna port)
-82 dBm for QPSK at 10-6 BER in 3.5MHz channel
-76 dBm for 16QAM at 10-6 BER in 3.5MHz channel
Typical Range (16QAM downlink, QPSK uplink)
10 mi / 16 km
For more information please download brochure here.
|
