ExcelMAX Indoor CPE 3410

Overview

Axxcelera’s ExcelMAX™ Indoor CPE is a low cost, self-installable Point to Multipoint (PMP) CPE designed to operate in the 3.3-3.8 GHz spectrum and supports a Half Duplex FDD (Frequency Division Duplex) or a TDD (Time Division Duplex) architecture. The WiMAX-2004 compliant Indoor CPE allows service providers to offer broadband wireless services to customers in Non Line of Site (NLOS) locations. The ExcelMAX CPE 3400 supports a strong suite of Quality of Service (QoS) features, including Committed Information Rate (CIR), Peak Information Rate (PIR), BE, nrtPS, rtPS, and UGS. The CPE supports Call Admission Control (CAC) features, which allows for scalable carrier class VoIP services and the IGMP protocol which supports Video Broadcast services. All CPEs in a service provider network are completely managable remotely by Axxcelera’s carrier-class Network Management System using SNMP protocol.

Reasons to Buy ExcelMAX Indoor CPE 3410

ExcelMax Indoor CPE offers service providers an ability to offer residential broadband wireless services at rates competitive with wireline technologies. The self install nature of the indoor CPE allows Service Providers to sell CPEs from retail outlets since no professional installation mechanisms are needs for the indoor CPE. Its multi-service capabilities and QoS features allow service providers to offer reliable, high quality, revenue generating applications (data, VoIP and video broadcast) to different customer types (residential, SoHo, MDU and SME). The mature CPE architecture has been deployed in large data, voice and video networks and ensures reliable operations in the field. Axxcelera provides a suite of management, installation, provisioning and configuration tools which make the installation and maintenance of the CPE extremely simple.

Key Features

WiMAX-2004 Compliant
Uplink Subchannelization improves NLOS performance
Self Install, Self Configure Indoor CPE
Half-Duplex FDD and TDD support
FCC approved for 3.65GHz operation
Comprehensive Quality of Service (CIR, PIR, Priority) and VLAN support

Benefits

Low cost CPE allows mass residential rollout
Self Install feature avoids cost of professional installation
Robust, field proven platform

RF SPECIFICATIONS

Frequency Band: 3.3-3.8 GHz
Air Interface Standard: 802.16-2004
Architecture: Point to Multipoint (PMP)
Duplex Scheme: Half Duplex FDD/TDD
FDD Duplex Spacing: 100 MHz typical
RF Channel Sizes: 7 MHz, 3.5 MHz
Modulation Types: Dynamic Adaptive: 64QAM, 16QAM, QPSK, BPSK
Coding Rates: 1/2, 2/3 and 3/4
Net Throughput: > 20 Mbps (7 MHz channel size )
Transmit Power: +24dBm
Receive Sensitivity: -93dBm
Antenna Beam Width: 90°
Integrated Antenna: 10 dBi gain, 90° beam width, Vertical polarization
External Antenna Support: SMA connector

ENVIRONMENTAL CHARACTERISTICS

Operating Temperature: -5°C to +40°C
Operating Humidity: 10-90% non-condensing
Power supply: 120-240 VAC 50-60 Hz
Power consumption: 10 Watts nominal
Dimensions: 200mm x 125mm x 108mm
Weight: 1.5 kg

STANDARDS SUPPORTED

Air Interface: IEEE 802.16-2004
NLOS Enhanced Features: Uplink Sub-channelization
Prioritization:
802.1p (8 different prioritization levels)
VLAN: 802.1Q
Security/Encryption:
x.509 BS and SS authentication, CBC-Mode 56-bit DES, AES-CCM mode
Interfaces: 10/100 Base T Full Duplex
Network Management: SNMP v3
International Standards:
Wireless performance R&TTE Directive 1999/5/EC, EN 302 326-2, EN 302 326-3
EMC:
EMC Directive 2004/108/EC, EN 301 489-1, EN301 489-4
Safety:
Low Voltage Directive 2006/95/EC, IEC 60950, EN 60950