ExcelFlex 6-38 GHz

The ExcelFlex™ is a full featured microwave radio for the global telecommunications market. It consists of a Software Defined Indoor Unit™ (SDIDU™) and Outdoor Unit (ODU). The ExcelFlex radios include a state-ofthe-art single chip modem ASIC, allowing a highly integrated IDU with flexible modulation for spectral efficiency and powerful Forward-Error-Correcting schemes. The ExcelFlex is designed to support flexible payload types and data rates, as well as payload switching, in 1+0 unprotected, 2+0 east/west, 1+1 protected, and 4+0 configurations.

Advanced capabilities: The Software Defined IDU includes an integrated Crosspoint Switch that allows a total of 160 E1s (200 T1s) to be mapped from and to any of three different ports: East Modem (maximum 64E1/84T1), West Modem (maximum 64E1/84T1), and Local Front Panel (maximum 32E1/32T1). The Crosspoint Switch gives systems integrators and network designers flexibility in designing ring and linear point-to-point-to-point architecture networks.

AB-MAX

AB-MAX consists of fixed broadband wireless access equipment (Access Point and CPE) for Internet, data, multimedia, video, voice, and other emerging IP based applications. Combining WiMAX with higher level network features, AB-MAX provides a robust, cost-effective alternative to wired alternatives such as T1/E1, DSL and cable modems.

ExcelMAX Access Point

The ExcelMAX Access Point is a Point to Multipoint (PMP) base station product designed to operate in the 3.3-3.8 GHz spectrum and supports 3 different Duplex architectures – Full Duplex FDD (Frequency Division Duplex), Half Duplex FDD, and TDD (Time Division Duplex). The WiMAX (802.16-2004) compliant Non Line of Site (NLOS) platform supports a strong suite of Quality of Service (QoS) features and multiple services, which allow a service provider to offer different Service Level Agreements (SLAs) to hundreds of residential, SoHo, MDU and SME users from a single Access Point location.

ExcelMAX Full Duplex FDD (FD-FDD) CPE 3210

Axxcelera’s ExcelMAX™ FD-FDD CPE3210 is a Point to Multipoint (PMP) CPE designed to operate in the 3.3-3.8 GHz spectrum and supports a Full Duplex FDD (Frequency Division Duplex) architecture. The WiMAX-2004 compliant CPE allows service providers to offer broadband wireless services to customers in Non Line of Site (NLOS) locations. The Full Duplex CPE 3210 allows carriers to offer excellent quality voice and video services to business and residential users. The ExcelMAX™ CPE3210 supports a strong suite of Quality of Service (QoS) features, including Committed Information Rate (CIR), Peak Information Rate (PIR), BE, nrtPS, rtPS, and UGS. The CPE supports Call Admission Control (CAC) features, which allows for scalable carrier class VoIP services and the IGMP protocol which supports Video Broadcast services. All CPEs in a service provider network are completely managable remotely by Axxcelera’s carrier-class Network Management System using SNMP protocol.

ExcelMAX Half Duplex FDD (HD-FDD)/TDD CPE 3310

Axxcelera’s ExcelMAX™ H-FDD/TDD CPE is a Point to Multipoint (PMP) CPE designed to operate in the 3.3-3.8 GHz spectrum and supports a Half Duplex FDD (Frequency Division Duplex) or a TDD (Time Division Duplex) architecture. The WiMAX-2004 compliant CPE allows service providers to offer broadband wireless services to customers in Non Line of Site (NLOS) locations. The ExcelMAX™ CPE 3310 supports a strong suite of Quality of Service (QoS) features, including Committed Information Rate (CIR), Peak Information Rate (PIR), BE, nrtPS, rtPS, and UGS. The CPE supports Call Admission Control (CAC) features, which allows for scalable carrier class VoIP services. All CPEs in a service provider network are completely manageable remotely by Axxcelera’s carrier-class Network Management System using SNMP protocol.

AxxceLTE™ Base Band Unit

The AxxceLTE™ Base Band Unit provides all the processing necessary for multiple sectors of LTE service in a compact outdoor design. It connects to a maximum of three AxxceLTE™ RRH units over 6Gbps CPRI fiber links using a daisy chain or star configuration. It is also possible to configure the base band units as redundant pairs. This flexible architecture allows for easy expansion while protecting prior capital investment. This best in class system can be configured to provide the optimal performance in the carrier, wireless ISP, industrial, public safety and private markets.

AxxceLTE™ eNodeB

The AxxceLTE™ eNodeB product family provides LTE wireless access over a wide range of frequency bands in a compact outdoor design. The family supports all-in-one and distributed architectures facilitating easy expansion while protecting prior capital investment. This best in class system can be configured to provide the optimal performance in the carrier, wireless ISP, industrial, public safety and private markets.

AxxceLTE™ Remote Radio Head

The AxxceLTE™ Remote Radio Head provides high-performance compact outdoor design that is suitable for demanding telecom applications. The AxxceLTE™ RRH supports four RF channels that can be software configured to be either 4 x 5W or 2 x 10W. It also supports remote electrical tilt (RET) making it easy to install along with advanced antenna systems. It seamlessly connects to the AxxceLTE™ BBU over 6Gbps CPRI fiber links in a redundant, daisy chain or star configuration. This best in class system can be configured to provide the optimal performance in the carrier, wireless ISP, industrial, public safety and private markets.

AxxceLTE™ µEPC

The AxxceLTE™ μEPC is a cost optimized all-in-one alternative to traditional segmented EPC platforms. It integrates the MME, S-GW, P-GW and HSS functionality and supports LTE standard external interfaces. Using a non-proprietary x86 hardware platform the μEPC can easily be deployed in any environment. It can even be installed on a laptop to provide a highly portable LTE demo solution. The AxxceLTE™ μEPC is a compact, scalable, affordable, and nimble EPC solution designed especially for the wireless ISP, industrial, public safety and private markets.